home *** CD-ROM | disk | FTP | other *** search
- Path: severus.mbfys.kun.nl!rhialto
- From: rhialto@mbfys.kun.nl (Olaf Seibert)
- Newsgroups: comp.sys.cbm
- Subject: Re: Please HELP me collect! (1541 drive number change)
- Date: 2 Jan 1996 14:59:13 GMT
- Organization: University of Nijmegen, The Netherlands
- Distribution: world
- Message-ID: <4cbh81$j6j@wn1.sci.kun.nl>
- References: <4ar5j1$irj$1@mhade.production.compuserve.com> <4b8a0f$222j@yuma.ACNS.ColoState.EDU> <7HX2wwyjtgPJ088yn@mail.msen.com>
- NNTP-Posting-Host: severus.mbfys.kun.nl
-
- In <7HX2wwyjtgPJ088yn@mail.msen.com> brain@mail.msen.com (Jim Brain) writes:
- |In article <4b8a0f$222j@yuma.ACNS.ColoState.EDU>,
- |vcowley <vcowley@lamar.colostate.edu> wrote:
- |> I often wondered if it would be possible to cut the correct jumper then
- |>soder wires to each side and connect them to a toggle or slide switch
- |>mounted on the case. This would make changing from one drive number to
- |>another as easy as the flick of a switch.
- |>
- |>Any thoughts???
- |
- |Go ahead. Many people do this.
-
- But remember that the drive only reads its hardware-set device number
- when it resets, either by power-on or by the U: command.
-
- -Olaf.
- --
- ___ Copyright 1996 Olaf 'Rhialto' Seibert. All Rights Reserved.
- \X/ You are not allowed to read this using any kind of Micro$oft product.
-